Phoenix Contact FL SWITCH MM HS UM E User Manual Download Page 124

Page: 124 / 292

FL SWITCH MM HS

4-44

PHOENIX CONTACT

6874_en_16

trapPowerSupply

trapSecurityPort

trapRstpRingFailure

trapPofDiagPort

trapPoEPort

trapMrpStatusChange

trapManagerConnection

OID

1.3.6.1.4.1.4346.11.11.3.0.4

Description

Sent each time the redundant power supply fails.

OID

1.3.6.1.4.1.4346.11.11.3.0.5

Description

Sent each time a disabled MAC address accesses a port.

OID

1.3.6.1.4.1.4346.11.11.3.0.6

Description

Sent in the event of a link interrupt in the redundant RSTP ring.

OID

1.3.6.1.4.1.4346.11.11.3.0.7

Description

Sent each time the status of the POF-SCRJ port changes.

OID

1.3.6.1.4.1.4346.11.11.3.0.8

Description

Sent each time the status of the PoE port changes.

OID

1.3.6.1.4.1.4346.11.11.3.0.9

Description

MRP manager only: Sent each time the status of the MRP ring port changes.

OID

1.3.6.1.4.1.4346.11.11.3.0.99

Description

Trap to test the connection between the SNMP agent and the network management sta-

tion.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14178-Phoenix-Contact-2832357-FL-IF-2TX-VS-RJ-D-Media-Module-for-Modular-Switch.aspx

Summary of Contents for FL SWITCH MM HS UM E





































































































































































































































































































Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews:

Phoenix Contact FL SWITCH MM HS UM E, User Manual, Page: 124 / 292

Search results

Summary of Contents for FL SWITCH MM HS UM E

Reviews: