Pentair FLECK 3150 NXT, Installer Manual

Page: 114 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
114 / 182 Ref. MKT-IM-010 / C - 18.10.2019
6.2.5.29 Push settings
Select the desired Master Programming settings on one unit then push the same
settings to all other connected units.
Info
Available only for multi-valves systems.
Info
The ability to transmit settings from one unit to all other connected units. After push
settings are complete, you may still make unique changes to individual units.
Options:
• off;
• on.
a) Select the push settings with and ;
b) Default setting: enabled;
c) Press to validate the selection and advance to the
next parameter.
6.2.5.30 Save as non-factory
Info
Parameters set on master programming menu can be saved as a non-factory program.
This saved program will be restorable from the reset menu.
Options:
• off;
• on.
a) Select save as non-factory option with and ;
b) Default setting: disabled;
c) Press to validate the selection and advance to the
next parameter.
6.2.5.31 Lock settings
Select the desired lock settings option (off, time based, delayed, or enter code).