Pentair FLECK 3150 NXT, Installer Manual

Page: 111 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
Ref. MKT-IM-010 / C - 18.10.2019 111 / 182
• off.
a) Set continuous flow on with and ;
b) Default setting: off;
c) Press to validate the selection and advance to the
next parameter;
d) Adjust flow rate with , and ;
e) Can be adjusted from: 0.1 to 227.1 l/min;
f) Press to validate the selection and advance to the
next parameter;
g) Adjust duration with and ;
h) Can be adjusted from: 1 to 255 Hours;
i) Press to validate the selection and advance to the
next parameter.
Continuous flow detect
activated.
Continuous flow detect -
Flow rate 0.1 l/min.
Continuous flow detect -
Duration 8H.
6.2.5.28 Auxiliary Relays settings
Program auxiliary output relays (dry contact). To locate the relays on the board, see
AUX 1 and AUX 2 at NXT2 controller connections [
} Page 54].
Info
The NXT2 has two auxiliary relays available based on alarm, cycle, time or volume.
The following settings are auxiliary 1 settings and are the same for auxiliary 2.
Options:
• standby (activates relay from beginning of regeneration and during standby
phase);
• off;
• alarm based;
• cycle based;
• time based;
• volume based.
a) Choose the options of relay with and ;
b) Default setting: disabled;
c) Press to validate the selection and advance to the
next parameter.
Disabled.