Pentair FLECK 3150 NXT, Installer Manual

Page: 116 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
116 / 182 Ref. MKT-IM-010 / C - 18.10.2019
6.2.6.1 Commands
a) Press and hold to enter the Diagnostic mode.
b) Press to see the next data group or press to return to previous data group.
c) Press and hold to exit the Diagnostic mode at any time.
6.2.6.2 Flow rate
Info
The display is updated every second.
6.2.6.3 Peak flow rate
Info
The controller registers the highest flow rate since the last regeneration.
6.2.6.4 Totalizer
Info
The controller registers the total volume of treated water that passes through the
meter since start-up (or last hard reset).
a) To reset, press and hold the buttons and for
5 seconds until the display shows zero.
6.2.6.5 Reserve
Info
Shows the reserve capacity settings.