Installer manual Fleck 3150 NXT/NXT2 - Maintenance
Ref. MKT-IM-010 / C - 18.10.2019
143 / 182
9.4.5
Power head, piston and/or seal and spacer kit disassembly/replacement
a) Using a flat screwdriver, unscrew (
1
) and open the cover (
2
).
b) Using pliers, remove the clip
(6)
and the connecting pin (
7
).
c) Using a 32 mm wrench, unscrew (
3
).
d) Using a 10 mm wrench, unscrew (
4)
and remove the power head (
5
).
e) Using pliers, remove the piston (
10
).
f) Using a small hook, remove a seal (
12
).
g) Using the puller, remove a spacer (
8
or
9
).
h) Repeat the two previous steps for all the seals and spacers.
i) Lubricate each new seals (
12
).
j) Put back a seal (
12
) using the stuffer.
k) Put back a spacer (
8
or
9
) using the stuffer.
Mandatory
Respect the order of the spacers shown on the sketch.
l) Repeat the two previous steps for all the seals and spacers.
m) Lubricate the piston o-ring (
11
).
n) Put back the piston (
10
).
o) Follow the procedure four first steps in reverse order to rebuild.
CAUTION
Use only approved silicone grease or soapy water.
9.4.5.1
Special tools needed
Item
Part number
Description
Packaging
quantity
1
12682
Puller
1
2
12683
Stuffer
1
Summary of Contents for FLECK 3150 NXT
