Pentair FLECK 3150 NXT, Installer Manual

Page: 95 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
Ref. MKT-IM-010 / C - 18.10.2019 95 / 182
Parameter Options Definition Note
AUX. 2: CYCLE
BASED
SP Service position Only displayed if “Cycle based”
is chosen for auxiliary 2;
Activate or de-activate for each
position ( = deactivated;
= activated).
BW Backwash position
BD Draw and slow rinse
position
RR Rapid rinse position
RF Refill position
SB Pause position
AUX. 2: TIME
BASED - START
TIME #1
0 to total
regeneratio
n time
minus
1 minute
Minute Only displayed if “Time based” is
chosen for auxiliary 2.
AUX. 2: TIME
BASED - END
TIME #1
from start
time#1 plus
1 minute
until total
regeneratio
n duration
Minute
AUX. 2: TIME
BASED - START
TIME #2
OFF
End time #1
to total
regeneratio
n duration
minus
1 minute
Minute Only displayed if “Time based” is
chosen for auxiliary 2 and END
TIME #1< total regeneration
duration minus 1 minute;
Range depend on Start and end
time #1 values.
AUX. 2: TIME
BASED - END
TIME #2
OFF
From start
time #2
+ 1 minute
until the
total
regeneratio
n duration
Minute Only displayed if “Time based” is
chosen for auxiliary 2 and START
TIME #2 ON;
Range depend on Start and end
time #1 values.
AUX. 2:
VOLUME
BASED –
VOLUME - L
0 to MAX Liter Only displayed if “volume based”
is chosen for auxiliary 1;
Volume range depend on
capacity;
Even if maximum theoretical
programmable value is 999999
the controller will take the unit
capacity as maximum volume.