Installer manual Fleck 3150 NXT/NXT2 - Maintenance
146 / 182
Ref. MKT-IM-010 / C - 18.10.2019
9.4.7
Cams replacement
a) Using a flat screwdriver, unscrew (
1
) and open the cover (
2
).
b) Remove the micro-switches (
3
), see Micro-switches replacement [
c) Disconnect the motor (
4
).
d) Using a Philips screwdriver, open the controller (
7
).
e) Using pliers, remove the clip (
5
) and the connecting pin (
6
).
f) Using pliers, remove the circlip (
12
) and the wheel (
11
).
g) Using a 10 mm wrench, unscrew (
9
) and remove the plate (
10
) and the
camshaft (
8
).
h) Using a pin punch, remove the pin (
13
).
i) Reverse above procedure steps to rebuild.
Summary of Contents for FLECK 3150 NXT
