Pentair FLECK 3150 NXT, Installer Manual

Page: 12 / 182

Installer manual Fleck 3150 NXT/NXT2 - Safety
12 / 182 Ref. MKT-IM-010 / C - 18.10.2019
Any non-observation of the safety and protection rules, as well as any existing legal and
technical regulations, will result in a risk of temporary or permanent injury, damage to
property or environmental pollution.
2.3.1 Personnel
CAUTION
Only qualified and professional personnel, based on their training, experience and
instruction as well as their knowledge of the regulations, safety rules and operations
performed, are authorized to carry out necessary work.
2.3.2 Material
The following points must be observed to ensure proper operation of the system and
the safety of user:
• be careful of high voltages present on the transformer (100 - 240V);
• do not put your fingers in the system (risk of injuries with moving parts and shock
due to electric voltage).
2.4 Hygiene and sanitization
2.4.1 Sanitary issues
Preliminary checks and storage
• Check the integrity of the packaging. Check that there is no damage and no signs
of contact with liquid to make sure that no external contamination occurred;
• the packaging has a protective function and must be removed just before
installation. For transportation and storage, appropriate measures should be
adopted to prevent the contamination of materials or the objects themselves.
Assembly
• Assemble only with components which are in accordance with drinking water
standards;
• after installation and before use, perform one or more manual regenerations in
order to clean the media bed. During such operations, do not use the water for
human consumption. Perform a disinfection of the system in the case of
installations for treatment of drinking water for human use.
Info
This operation must be repeated in the case of ordinary and extraordinary
maintenance. It should also be repeated whenever the system remains idle for a
significant time.
Info
Valid only for Italy: In case of equipment used in accordance with the DM25, apply all
the signs and obligations arising from the DM25.