Pentair FLECK 3150 NXT, Installer Manual

Page: 85 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
Ref. MKT-IM-010 / C - 18.10.2019 85 / 182
a) Set the day of the month with and :
b) Press to validate the selection and advance to the
next parameter.
6.2.4 Basic programming
Info
Menus are displayed in a defined and incremental order. Depending of selected system
or regeneration type, some of this parameters may not be visible. Editable or selected
value or digit is marked by one or two triangles.
6.2.4.1 Basic programming mode chart
Parameter Options Definition Note
DAY
OVERRIDE /
TIME DRIVEN
OFF to 99 Day Days between regenerations only
for metered regeneration types.
Hours or days between
regenerations only for time clock
regeneration type. 4, 8, 12, 16,
20
Hour
1 to 1999 Day
REGENERATIO
N TIME
00:00 to
23:59
Hour Regeneration time will not appear
when day override/time driver is
by hours for time clock or OFF for
meter immediate regeneration
type.
HARDNESS 1 to 1999 Gram as CaCO
3
equivalent if hardness
unit is mg/L
°FTH if hardness unit
is °FTH
°dH if hardness unit is
°dH
°eH if hardness unit is
°eH
Those screens will only display
when regeneration type selected
is softener meter immediate or
delayed.
VOLUME
REMAINING
0 to 4820 Liter
PUSH
SETTINGS
ON (default) Only displayed for multi unit
systems.
OFF -
6.2.4.2 Day Override / Time-driven
Set the maximum number of days between two regenerations, regardless from the
volume of water treated.