Pentair FLECK 3150 NXT Installer Manual Download

Page: 105 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming

Ref. MKT-IM-010 / C - 18.10.2019

105 / 182

6.2.5.20

Remote signal duration

Set remote signal duration.

Info

The availability depends on remote regeneration option programmed in the previous
step.

Info

The contact will close after a preset signal duration. When the contact closes, remote
regeneration signal is acquired and a regeneration will start (immediate or delayed) as
programmed in Remote regeneration [

}

Page 104] .

a) Set the signal duration with

and

;

Can be adjusted from 1 to 5940 seconds;

b) Press to validate the selection and advance to the

next parameter.

6.2.5.21

Day of the week

Select the day of the week of regeneration.

Info

Available only for day of the week regeneration type.

Options:

• Sunday;

• Monday;

• Tuesday;

• Wednesday;

• Thursday;

• Friday;

• Saturday.

a) Select the days for regeneration with

and

;

Default setting: Sunday;

Multi-selection is possible;

Not selected days are marked by

and selected

days are marked by

;

b) Press to validate the selection and advance to the

next parameter.

Summary of Contents for FLECK 3150 NXT























































































































































































Search results

Summary of Contents for FLECK 3150 NXT

Reviews:

Related manuals for FLECK 3150 NXT

Brands by name

Popular brands

Pentair FLECK 3150 NXT, Installer Manual

Search results

Summary of Contents for FLECK 3150 NXT

Reviews:

Related manuals for FLECK 3150 NXT

Brands by name

Popular brands