5-10
The Keypad:
650S AC Drive
Selecting Local or Remote Control
The drive can operate in one of two ways:
Remote Control:
Allowing access for application programming using digital and analog inputs and outputs
Local Control:
Providing local control and monitoring of the drive using the Keypad
Local control keys are inactive when Remote Control is selected.
In Remote Control, the drive uses a remote setpoint. In Local Control, it uses the Local Setpoint parameter whose value is
adjusted on the MMI.
Note:
You can only change between Local and Remote Control when the drive is “stopped”, and either
or the Local
Setpoint is displayed.
Remote to Local Control:
Local to Remote Control:
Note:
For safety reasons, the drive will not return to Remote Control if this will cause the drive to start. Check RUN and
JOG inputs are low.
Hold this key down until
the display shows
REMOTE
LOCAL
Hold this key down until
the display spells
Release the key to display
the Local Setpoint
REMOTE
LOCAL
View the Local Setpoint
Hold this key down until
is removed from the display
Release the key to display
