12-2
Applications
650S AC Drive
The Default Application
The drive is supplied with 6 Applications, Application 0 to Application 5. Each Application recalls a pre-programmed
structure of internal links when it is loaded.
•
Application 0 will not control a motor. Loading Application 0 removes all internal links.
•
Application 1 is the factory default application, providing for basic speed control
•
Application 2 supplies speed control using a manual or auto setpoint
•
Application 3 supplies speed control using preset speeds
•
Application 4 is a set-up providing speed control with Raise/Lower Trim
•
Application 5 supplies speed control with Run Forward/Run Reverse
IMPORTANT:
Refer to Chapter 5: The Keypad – Special Menu Features to reset the drive to factory default values which are suitable for
most applications.
How to Load an Application
In the
menu, go to
and press the
key twice.
The Applications are stored in this menu.
Use the
keys to select the appropriate Application by number.
Press the
key to load the Application.
DEFAULT
