10-8
Certification for the Drive
650S AC Drive
Certificates
650S
0.25
–
2.0
K
W
230V
EC
D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 19/10/2009
Issued for
EMC Directive
Low Voltage Directive
The drive is CE
compliance
with the EMC
Directive when
the unit is used
as
relevant
apparatus
.
In accordance with the EEC Directive 2004/108/EC
We Parker Hannifin Ltd., Automation Group, SSD
Drives Europe, address as below, declare under our sole
responsibility that the above Electronic Products when
installed and operated with reference to the instructions
in the Product Manual (provided with each piece of
equipment) is in accordance with the relevant clauses
from the following standard:-
BSEN61800-3 (2004)
In accordance with the EEC Directive 2006/95/EC
We Parker Hannifin Ltd., Automation Group, SSD Drives
Europe, address as below, declare under our sole responsibility
that the above Electronic Products when installed and operated
with reference to the instructions in the Product Manual
(provided with each piece of equipment), is in accordance with
the following standard :-
EN50178 (1998)
marked in accordance
with the low voltage
directive for electrical
equipment and
appliances in the
voltage range when
installed correctly.
M
ANUFACTURERS
D
ECLARATIONS
This is
EMC Declaration
Machinery Directive
Since the potential
provided to aid
your
justification for
EMC
compliance
when the unit is
used as a
We Parker Hannifin Ltd., Automation Group, SSD
Drives Europe, address as below, declare under our sole
responsibility that the above Electronic Products when
installed and operated with reference to the instructions
in the Product Manual (provided with each piece of
equipment) is in accordance with the relevant clauses
from the following standard:-
BSEN61800-3 (2004)
The above Electronic Products are components to be
incorporated into machinery and may not be operated alone.
The complete machinery or installation using this equipment
may only be put into service when the safety considerations of
the Directive 2006/42/EC are fully adhered to.
Particular reference should be made to EN60204-1 (Safety of
Machinery - Electrical Equipment of Machines).
All instructions, warnings and safety information of the Product
Manual must be adhered to.
hazards are mainly
electrical rather than
mechanical, the drive
does not fall under the
machinery directive.
However, we do supply
a manufacturer’s
component.
Dr Martin Payn (
Conformance Officer)
declaration for when
the drive is used (as a
component) in
machinery.
P A R K E R
H A N N I F I N L I M I T E D , A U T O M A T I O N GR O U P , S S D D R I V E S E U RO P E
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000 FAX: +44(0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
