Parker 10G-46-0600-BF, Product Manual

Page: 24 / 151

The Menu
6-3
AC10 Inverter
6.1.2 Panel Display
Table 6-4 Items and Remarks Displayed on the Panel
Items Remarks
AErr Analog Input has open connection
CE Indicates Communication error
Err2 Tuning parameters are set wrong
Err3 Instantaneous Over Current
Err4 Current Sampling Fault
Err5 PID parameters are set wrong
Err6 Watchdog Fault
ESP External coast stop terminal is closed, ESP will be displayed.
FL Indicates Flycatching fault condition
LU Indicates under-voltage for input condition
HF-0
This Item will be displayed when you press “M” in stopping status, which
indicates jogging operation is valid. But HF-0 will be displayed only after
you change the value of F132.
-HF-
It stands for resetting process and will display target frequency after reset.
OC Indicates over-current condition (OC)
OC1 Indicates over-current condition (OC1)
OE Indicates over-voltage condition
OH Indicates heatsink over-heat condition
OH1 Indicates external over-heat condition
OL1 Indicates inverter over-load condition
OL2 Indicates motor over-load condition
PF0 Indicates phase loss for output condition
PF1 Indicates phase loss for input condition
10.00
Indicating inverter’s current running frequency (or rotate speed) and
parameter setting values, etc.
Flashing in stopping status to display target frequency.
0.
Holding time when changing the running direction. When “Stop” or “Free
Stop (Coast Stop)” command is executed, the holding time can be
cancelled.
A100
Output current (100A). Keep one digit to the right of the decimal point
when current is below 100A.
b*.* PID feedback value is displayed.
F152 Function code (parameter code).
H * Heat Sink temperature is displayed.
L*** Linear speed is displayed.
o*.* PID given value is displayed.
u100 DC Bus voltage (100V).
U100 Output voltage (100V).