Panasonic LJ-NA02, Installation Manual

Page: 72 / 132

72
Installation Manual
■
Preparation
• See 7-2 and switch to the Parameter Item Selection mode showing the initial display [no4.01].
■
Operation Procedure
• While [no4.01] is displayed, press "MENU (ENTER)" to switch to the Parameter Display mode.
• While the Display mode is selected, press "DATA ▲" or "CLOCK ▼" and select parameter item. Then press
"MENU (ENTER)" to switch to the Parameter Setting mode. Or press "ON/OFF (CANCEL)" to return to the
Parameter Item selection.
• While the Parameter Setting mode is selected and digits are blinking, press "DATA ▲" or "CLOCK ▼" and
adjust the parameter level. (If digits are not blinking, you can not change the value.)
• When the numerical parameter is 4 or 5 digits, at first set the numerical number in front of the decimal point,
and press "MENU", set the numeric number behind the decimal point.
• During adjusting the parameter level, press "MENU (ENTER)" to fix the parameter level. Or press "ON/OFF
(CANCEL)" to cancel. Then return the Parameter Display mode.
• After returning the Parameter Display mode, press "ON/OFF (CANCEL)" to return the Parameter Item Selection.
Parameter Item
Selection
Parameter
Setting Mode 1
Parameter
Setting Mode 2
Parameter
Display Mode
or
Over Voltage
Stage 1 (Level)
Over Voltage
Stage 1 (Time)
Over Voltage
Stage 2 (Level)
Under Voltage
Stage (Level)
Over Voltage
Stage 2 (Time)
Under Voltage
Stage (Time)
or
or
or
or
Trip Level Trip Level
Trip Time
Trip Level Trip Level
Trip Level Trip Level
Trip Time
(Setting Disabled)
Trip Time
Protection Level
Setting
or