Panasonic LJ-NA02, Installation Manual

Page: 84 / 132

84
Installation Manual
7-12. Volt-watt Response Mode Setting
The Volt-watt response mode varies the output power of the inverter in response to the voltage at its terminal.
The response curve required for the volt-watt response mode is defined by the volt response reference values in
table listed in the section 7-11 and corresponding power levels.
■
Preparation
• See 7-2 and switch to the Parameter Item Selection mode showing the initial display [no4.08].
■
Operation Procedure
• While [no4.08] is displayed, press "MENU (ENTER)" to switch to the Parameter Display mode.
• While the Display mode is selected, press "DATA(▲)" or "CLOCK(▼)" and select the parameter item. Then press
"MENU (ENTER)" to switch to the Parameter Setting mode. Or press "ON/OFF (CANCEL)" to return to the
Parameter Item selection.
• While the Parameter Setting mode is selected and digits are blinking, press "DATA(▲)" or "CLOCK (▼)" and
select "On" or "Off".
• After the selection, press "MENU (ENTER)" to fix the data. Or press "ON/OFF (CANCEL)" to cancel. Then return
the Parameter Display mode.
• After returning the Parameter Display mode, press "ON/OFF (CANCEL)" to return the Parameter Item Selection.
Parameter Item
Default Set Point
Australia/New Zealand
Range
Parameter
Selection Display
OFF
OFF
ON/OFF
ON/OFF
Volt-watt
Response Mode
(Discharge)
Volt-watt
Response Mode
(Charge)
Table Volt-watt Response Mode
Volt-watt Response
Modes Setting
Parameter Display Mode Parameter Item Selection Parameter Setting Mode
Volt-watt Response Mode
(Discharge)
Mode Setting
(Discharge)
or
Volt-watt Response Mode
(Charge)
Mode Setting
(Charge)
or
or
or
or