Panasonic LJ-NA02, Installation Manual

Page: 38 / 132

38
Installation Manual
Line Configuration for the cable details.
■
Connecting the CT for Reverse Current
1) CT configuration and polarities
The CT should be wired such that the polarity of the CT terminal and the CT output lines are the same.
Use the included one-touch CT connector for connecting the CT output line and the cable.
CT
CT output
line
LOAD
side
GRID
side
Cable
For CT
connection
One-touch
connector
Black
(+)
150
Ø1
6
46.
5
31
White
(-)
2) Cable types and sizes
PVC Flexible Cable 2C 0.75 mm
2
* Please use copper wire cables.
* See 1-1 Power and Communication
3) Stripping of wire
Please strip as conductor's stripped length related as drawing.
10mm splayed twisted bent
4) Connecting
(1) Checking using a
strip gauge
(2) Push up the lever.
Do not push up all
of the levers at the
same time.
(3) Insert the wire as
deeply as possible.
(4) Push down
the lever to
establish the wire
connection.
(5) Gently pull on
each of the wires
to make sure that
they do not come
out. (Do not pull on
them too hard.)
CT
26.6
◎ CT tarminal