Panasonic LJ-NA02, Installation Manual

Page: 57 / 132

57
Installation Manual
by qualified personnel.
date/time notified by the Network Adaptor is given higher priority.
5. Setting Date/Time
5-1. Date/Time
The date/time needs to be set for this system to operate normally. The Programmed charge/discharge time mode
cannot work correctly if the date/time is not set correctly.
● If the ALARM LED is blinking in green, the date/time has not yet been set. Set the date/time.
● The date/time setting is required when not connecting to the Network Adaptor.
The scheduled operation mode cannot work correctly if the date/time is not set.
● When connecting with the Network Adaptor, the
However, the date/time needs to be set manually as an initial setting.
● The work must be performed
5-2. Date/Time Setting
■
Preparation
• See the list of commands in P.52 to switch to normal state conditions.
■
Operation Procedure
Display of Setting
Normal State
Stopped (Stand-alone)
Date/Time Setting Mode
Year (initial)
Month
Day
Hour
Minute
3 sec
Automatic
or
or
or
or
or
Stopped (Grid-connected)
1 sec