Panasonic LJ-NA02, Installation Manual

Page: 40 / 132

40
Installation Manual
Locations where Network Adaptor cannot be Mounted
flammable gases, chemicals or fire.
by qualified personnel.
6. Mounting of Network Adaptor
6-1. Location
The Network Adaptor is a wall-mounted product for indoor use. Determine the installation location in accordance with
the conditions outlined in this manual.
● Do not install it in places where there is a lot of humidity such as outdoors or in bathrooms.
● The work must be performed
● Do not install the product in the special locations listed below.
■
Standard Mounting Location of the Network Adaptor
Installation location Indoor
Operating temperature range [°C] 0 to 40 °C
Operating humidity [% RH] 0 to 80% RH (No dew condensation)
Maximum atmospheric pressure/altitude Lower than 1000 m above sea level
■
Special
x Locations exposed to direct sunlight.
x Locations exposed to rain or drops of water.
x Locations exposed to or potentially exposed to excessive steam, oil vapour, smoke, dust, corrosive substances, explosive/
x Locations subject to vibrations or shocks.
x Locations in the proximity of equipment/devices that are susceptible to radio interference, or locations that are emitting powerful
radio waves.
x Locations where wall mounting is not possible.
■
Mounting Position
Mount the Network Adaptor so that it is not tilted, and position the Lid release button so that is at the bottom.
Lid release button