S-3802S/A
,
SC-302
,
SC-302S/A
,
SC-304S/A
Battery Charger
Ver: A
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: [email protected]
USER MANUAL
S W I T E l e c t ro n i c s Co. , L t d.
S-3802S/A User Manual
SC-302 User Manual
Congratulations on your purchase of this product. Please read this user manual carefully.
W a r n i n g
C a u t i o n
Only limited to charge specified battery(ies), it may cause danger
if charge other battery(ies) due to incompatibility problem.
Only work in the temperature between 0
℃
-40
℃
.
Keep the terminals clean and ensure the reliable connection.
It is normal phenomenon that the battery charger may become
warm in use.
Please unplug the power lead if the battery charger is not used for
a long time.
Do not cover the cooling vent.
Please do not put the battery charger in unstable place, it may fall
and cause serious damage.
Store the battery charger in cool, dry and clean place.
◆
◆
◆
◆
◆
◆
◆
◆
Charging
：
2 channel sequential charging charger and gives priority to first inserted charger
channel.
1. Connect with power lead, turn on the power switch; the power indicator will light on.
2. When only one channel is inserted with battery, the LED indicator will indicates
the current charging status. When both channels are inserted with batteries, the
charger will give priority to charge the first inserted battery, and the LED indicator
will indicates the current charging status of the first inserted battery. After fully
charged, the charger will charge the other battery.
Red: The battery capacity is below 80%
Orange: The battery capacity is between 80% and 100%
Green: Fully charged, can be taken off
3. When fully charged, please press the battery release button to take off the battery.
Adapting output
：
The S-3802S/A offers one channel 4-pin XLR DC adapting output socket.
1. Connect with power lead, turn on the power switch; the power indicator will light on.
2. Connect the connecting wire to the charger 4-pin XLR DC output socket and the
current-using equipment to output power.
①
Charging channel(V-mount / Gold mount)
②
battery release button
③
Charging LED indicator
④
power indicator
⑤
power switch
⑥
power input socket
⑦
4-PIN XLR DC output socket
Charging
：
2 channel sequential charging charger and gives priority to first inserted charger channel.
1. Connect with power lead, turn on the power switch; the power indicator will light on.
2. When only one channel is inserted with battery,the LED indicator will indicates the
current charging status. When both channels are inserted with batteries,the charger will
give priority to charge the first inserted with batteries,and the LED indicator will
indicates the current charging status of the first inserted battery. After fully charged,the
charger will charge the other battery.
3. When fully charged,please press the battery release button to take off the battery.
①
⑥
⑦
②
③
④
⑤
①
charging channel
④
Power indicator
⑥
power input socket
①
④
◆
◆
◆
◆
◆
◆
◆
◆
Never expose the battery charger to rain or moisture.
Never attempt to open the battery charger, please contact the
local agent if have problems.
Never use metal or other conductors to touch the inside of the
battery charger.
Please make sure the voltage range is fit for the battery charger.
Never short-circuit the battery charger terminals.
Never immerse the battery charger in the water.
Please use the power adapter provided or recommended by
the manufacturer in order to avoid damage.
Never use the battery charger if it is already damaged.
Attention:
1.
When using 4-pin XLR DC output, please make sure the Voltage and the Power is fitted(13.8V, 3.6A)
2.
S-3802A/S can not charging and DC output at the same time. If channel(s) are inserted with battery(ies)during charging, there will be no DC output.
⑥
