Panasonic LJ-NA02, Installation Manual

Page: 28 / 132

28
Installation Manual
[Tightening torque 2 - 2.5 N•m]
Notice:
The batteries are installed in the back of the Main body.
Then secure each battery using the four battery fixing nuts (M5) included with the product.
battery fixing bracket holes with the stud bolts on the
2) Mounting the battery on the main body
Insert the battery into the main body from the front, align the
main body and slide the battery horizontally.
Following the same procedure, mount the other battery module on the upper level and the other module on the
lower level.
Stud bolt
Battery fixing bracket
Stud bolt
Battery fixing bracket
Battery orientation
LED is on the
upper side
Bracket
fixing
nuts
Bracket
fixing nut
(M5 Hexagon nut)
View A
Battery fixing bracket
View A
* Attach the cover and front lid if it will be some time before the test run after the wiring work has been completed.
(Front Lid installation method See 4-2
䐢㻌
2)
●
Mounting Check
Do not modify or disassemble.
There is no damage on the product.
The batteries are mounted in the correct orientation.
The fixing screws of each part are tightened with adequate torque.