Panasonic LJ-NA02, Installation Manual

Page: 43 / 132

43
Installation Manual
7. Electrical Connection of Network Adaptor
7-1. Electrical Connections
The Network Adaptor is as an electrical instrument. Please wire it safely following the applicable laws and
regulations.
● Always wear insulating gloves and insulated shoes while doing wiring.
● Protection device for the Network Adaptor must be set to OFF.
● Check that there is no voltage at all of the terminals.
● Ensure that the PE line is securely connected and grounded.
● Do not damage the covered insulation of the wiring.
● Prevent the introduction of foreign objects such as scrap wires.
● Use the types and sizes of wires in accordance with local regulations.
● Do not mistake the wiring systems and the polarities.
● Process the wires as
for secure connections.
● Please explain how to discharge static electricity.
● The work must be performed by personnel.
● The PE wire should be approximately 20 mm longer than the LINE wire.
● The wiring should be concealed in the walls.
● Increase the separation if the communication line and the power line carrying large currents are running in
parallel.
■
Preparation
Be sure to turn OFF the protection device in the distribution board and check that there is no voltage.