Panasonic LJ-NA02, Installation Manual

Page: 20 / 132

20
Installation Manual
■
Standard Installation Location for Lithium-ion Storage Battery System
4. Mounting of System and Battery
4-1. Location
The Lithium-ion storage battery system is a non-portable product suitable only for outdoor installation. Determine the
installation location in accordance with the conditions outlined in this manual. The Battery is only designed for
installation inside the system enclosure. Do not use it in other locations.
● Do not mount in a location that does not meet the criteria described below.
● Do not mount in places where there are high temperatures, or in the proximity of something that is burning.
● Do not mount in a location that cannot bear the weight of the product.
● Do not mount the product on a sloped surface.
● Do not install the battery anywhere else besides the inside of the product enclosure.
● The work must be performed by personnel.
● Do not attempt to mount the product in special locations listed below.
● Install in a place whereas the Rating Label can be seen.
Installation location Outdoor/Indoor*
Storage temperature range [°C] -20 to +40°C
Operating temperature range [°C]
0 to +40°C
(Discharging: -10 to 40°C)
Operating humidity [% RH]
0 to 90% RH
(No dew condensation)
Maximum atmospheric pressure/altitude Lower than 1000 m above sea level
Sunlight Protected from exposure to continuous direct sunlight.
* When the product is installed in the building or house, it is necessary to ensure all local building and regulations are complied with.