Panasonic LightPix AE20, User Manual

Page: 70 / 151

Function
Upper: Function name and options
to be displayed
Middle: Name
Lower: Description
Display on the operation unit
(The left LCD display shows default settings.)
A.SAVE: (ON / OFF)
Auto Save function:
Allows you to set to save the
settings automatically
ST.NO: (1 ~ 31)
Station Number
Sets a device number (unit) used
for RS-232C communication
BAUD.R: (9.6 ~ 57.6 kbps)
Baud Rate function:
Sets RS-232C communication
speed
OUT.D: (0 ~ 160 ms) 20 ms
Output Delay function:
Outputs inspection results after the
original output timing
CAP.D: (0 ~ 160 ms) 1 ms
Capture Delay function:
Sets the time delay from TRIGGER
signal input to image capture
I.TRR: (ON / OFF)
Internal Trigger function:
When the function is set to ON, the
LightPixAE20 automatically
performs continuous inspections
When OFF, inspection is performed
when TRIGGER signal is input.
INI.T: (1 ~ 7)
Initial Type:
Selected product type number
when the LightPixAE20 is turned on
(available only for colored areas)
SPEED: High / Middle / Low
Speed:
Allows you to select the processing
time of measurement
VER
Version:
Version, size of view range and
system and operation unit versions.
(size of view range differs
depending on the product number.)
T.TRG: (ON / OFF)
Teaching Trigger function:
Sets external trigger to ON (valid) or
OFF (invalid)
A.BACK: (ON / OFF)
Answer Back function:
Displays a detected color in pink on
the finder unit
63