Panasonic LightPix AE20, User Manual

Page: 110 / 151

5.2.2 Switching Product Types
What is product type switch?
Product type switch is to call a product type, for which you want to execute an inspection or a teaching, from
product types of 1 to 7.
To switch product types:
Specify a product type number you want to change using TYPE 1-3 signals (see the table shown below).
5.2.3 Swtiching to TEACHING Mode
What is TEACHING mode switch?
TEACHING mode switch is to switch between RUN (VIEW) mode and TEACHING mode.
To switch between TEACHING mode and RUN/RUN VIEW mode:
The operation modes are switched only by changing the TEACH signal as the table shown below.
To switch between TEACHING mode and RUN/RUN VIEW mode:
TEACH
ON OFF
READING mode RUN (RUN VIEW) mode
Only turning the signals on/off switches product types and operation modes. The status of signals
TEACH and TYPE 1 to 3 is always monitored except when the LightPixAE20 executes an
inspection. Therefore, after changing to the desired mode, maintain the status of these signals until
the next time you switch product types.
103