Panasonic LightPix AE20, User Manual, Page: 118 / 151

6.2.3 Notation Sytem for Data in Command/Response Messages
The data in command/response messages are described in the following two systems:
Decimal Data
x 10
n
: Decimal data
Condition System Description
Data register “2100” is
specified.
Register No.: Five
characters
0 2 1 0 0
ASCII
characters
The specified format for data register of WD
command is as follows:
Register No.: Five characters
x 10
4
x 10
0
x 10
3
x 10
2
x 10
1
ASCII
characters
Just specify “02100” as decimal data.
Hexadecimal Data
x 16
n
: Hexadecimal data
Condition System Description
Integer data “200” is
specified.
Writing data: Four
characters
C 8 0 0
ASCII
characters
Low High
Data format used for WD command is as
follows:
Writing data: Four
characters
x 16
1
x 16
0
x 16
3
x 16
2
ASCII
characters
Low High
If the condition data “200” is represented in
hexadecimal numbering system, it will be
“00C8” for ASCII characters. If low and high
are switched in accordance with the format
above, the number will be “C800”.
112