Panasonic LightPix AE20, User Manual

Page: 115 / 151

The format used for Command/Response Message
Each item
Name Specified
character
(ASCII
code)/Data Range
of
values Description
Header % (25H)
or
< (3CH)
--- Beginning of a message
•
%: Number of characters between a header
and a terminal code is less than 118.
•
<: Number of characters between a header and
a terminal code is within the range from119 to
2048.
Receiver/Sender 2-digit decimal 01 to 99 In command messages and response messages, the
unit (station) No. of the LightPixAE20 receiving the
command, message and sending the response
message are shown respectively.
Command # (23H) --- Indicates a command message
Response:
Normal $ (24H) --- Indicates a normal response message
Response:
Error ! (21H) --- Indicates a response message when an error occurred
Text
Error code 2-digit
hexadecimal 00 ~ FF Displays the details of the error when it occurred
Block Check code 2-digit
hexadecimal 00 to FF Detects an error in transmission data
If you replace a block check code with two asterisks
marks, a message can be transmitted without BBC.
Even in this case, the LightPix returns BBC.
Terminator
C
R
(0DH)
--- End of the message
109