Panasonic LightPix AE20, User Manual, Page: 100 / 151

Even if you selected X-directional measurement direction in CONFIGURATION mode, Y-directional
base length and the allowable range do not affect the inspection results. Similarly, even if you
selected Y-directional measurement direction in CONFIGURATION mode, X-directional base length
and the allowable range do not affect the inspection results.
4.6.7 Measurement Execution
The ways of mesurement execution
Internal trigger: ON
Measurement is automatically executed by switching to RUN mode.
Internal trigger: OFF
After switching to RUN mode, input the TRIGGER signal to external devices or
press the TRIGGER button.
Judged measurement results
The LightPixAE20 outputs these judgement results to parallel ports of OUT1 to OUT3
Judgement results OUT3 OUT2 OUT1
All OK Both maximum and minimum are
within the base /-value for
judgement base criteria
OFF
ON ON
MAX:OK Only maximum value is within the
range
OFF ON OFF
MIN: OK Only minimum value is within the
range
OFF OFF ON
All NG Both maximum and minimum values
are beyond the range, or the unit
failed to measure a length.
OFF OFF OFF
Internal Trigger: Switches ON/OFF in CONFIGURATION mode
Parallel input/output timing chart: Page 102
93