Panasonic LightPix AE20, User Manual

Page: 80 / 151

4.5.3 Setting Up the LightPixAE20 in CONFIGURATION
In CONFIGURATION mode, you can set up the main, operation and finder units and
also set and save the inspection/communication conditions as shown below.
Refer to section 4.7 ”Detailed Functions in CONFIGURATION Mode” for details of
each function.
The number in < > in the table below represents the button number of the operation
unit (see the figure on the right).
Upper: Function name and options
to be displayed
Middle: Name
Lower: Description
Display on the operation unit
(The left LCD display shows default settings.)
Display when starting
I.SETT: (CANCEL / SET)
Initial Setting (default):
Initializes the settings
If you want to initialize the settings,
select “SET” and press the <6> button
for approximately three seconds.
SAVE: (CANCEL / SAVE)
SAVE function:
Saves the current settings
If you want to save the settings, select
“SAVE” and press the <6> button for
approximately three seconds
TEACH: (OK / OKNG)
Teaching: OK only/OK&NG:
Allows you to select whether you want
to execute a teaching for OK products
only or both OK product and NG
product
B.L.PTN:
(ON/OFF10/OFF30/OFF60)
Backlight settings function:
Sets the backlight of the finder unit
L.ON.OF: (ON / OFF)
LED On/Off function:
Allows you to select whether or not
to use the built-in LED light
V.IMG1 ~ 8:
V.Image1 ~ 8:
Displays up to eight saved images
and the data detected when the
image was saved
↑ When the image is saved, the detection data
are displayed. When switching the image numbers, hold down the <7>
and <8> button.
SV.IMG: (OFF / ALL / NG)
Save Image function:
Saves images during inspection
A.SAVE: (ON / OFF)
Auto Save function:
Allows you to set to save the
settings automatically
73