Chapter 4
Settings — [Canvases]
ENGLISH - 57
[Snap on addition]
When placing the second window and after, positions a new window in contact with the window
positioned closest in the canvas window.
It is convenient when using the preview window for checking images in layout.
10) Click the [Take All] button.
f
The set content is sent to this device, and the window is displayed on the output device.
Number of windows that can be combined
The number of windows that can be combined is as follows.
Number of [EHQ] windows
2
4
6
8
Number of [HQ] and [Preview] windows
12
8
4
0
Total number of displayable windows
14
12
10
8
Canvas grid
To supplement the setting of window positioning, grids can be set and used. Grids are available only in windows selected to use grids. Multiple
grids can be used to set a window, but grids not operated will not move to a new grid. In addition, the setting will be changed or lost at each
logout from the control software because window grids cannot be saved.
The method to set grids is the same as the layout configuration. The grid size in the horizontal and vertical directions, and angle of rotation can
be set. Here, offset is very important because the center of grid is positioned associated with the output position already placed.
A final setting is a default window size. This can be set so that no matter what the input window resolution may be the window will be resized to
the grid window size.
When a new window is selected and a grid is set, whether to position the window with automatic positioning function or position it at any place
in the canvas window by drag-and-drop operation can be selected.
[Presets]
When the canvas window is used, information of windows positioned on the [Canvases] page can be saved and called back later. Presets can
be called any time from the [Presets] tab in the source area, and applied to the window being edited on the canvas. It is also possible to reflect
a change in window position in the called preset by overwrite. Furthermore, the preset of which position has been changed can be saved as
another preset. When the tab is clicked for the first time, no presets are registered. To use presets, click the [Get All Presets] button first to
load presets information saved in this device. When loading is completed, the list of presets ([Preset2] to [Preset21]) is displayed. Presets are
numbered starting from 2 because 0 and 1 are used by the system.
Saving presets
When editing of the canvas is completed, click any preset ([Preset2] to [Preset21]) button in the [Save] column to save the screen
configuration. If the data of the preset is not saved, the [Restore] column is displayed in gray. When saving of the preset is completed, click the
[Send All Presets] button to send the saved preset information to this device.
Note
f
Presets saved on the device can be deleted by the execution of the command.
On the [Comm Data] page, enter
routing.preset.RemovePresetFiles()
to the command entry column. Click the [Send] button to send a
command to the device, then turn the power off and back on again. For the [Comm Data] page, refer to [Comm Data] (
x
page 59).
