Chapter 1
Preparation — About your device
18 - ENGLISH
r
POWER SUPPLY section
POWER
OFF ON
AC IN~
100-240Vac
50-60Hz
+12V
1
3 4
2
1 <POWER> switch
Turns the power on/off.
2 <AC IN> terminal
Connects the supplied power cord.
3 Power input indicator
Displays the power input status.
Turns on at all times while the device is on and turns off when
the power is switched off.
4 Power output indicator
Displays the power output status.
Turns on when DC voltage is output.
Slot and input/output terminal numbering
r
Slots
This device has 16 slots for installing optional interface boards for signal input and output. From the top left, the slots are numbered
Slot1
,
Slot2
, up to
Slot16
.
Slot1
Slot5
Slot9
Slot13
Slot2
Slot6
Slot10
Slot14
Slot3
Slot7
Slot11
Slot15
Slot4
Slot8
Slot12
Slot16
Note
f
Slot1
and
Slot2
are exclusively used by input interface boards while
Slot15
and
Slot16
are exclusively used by output interface boards.
The 12 slots from
Slot3
to
Slot14
can be used by either input or output interface boards. For details on possible installation locations, refer
to “Installing optional accessories” (
x
page 71).
r
Input/output terminals
The input terminals are numbered
in1
,
in2
, and so on in order from the left. Similarly, the output terminals are numbered
out1
,
out2
, and so
on.
HD-SDI INPUT
ST
HD-SDI INPUT
3
1
2
4
in2
in3
in1
in4
(Example 1: In the case of Interface Board for HD/SD-SDI 4input)
DIGITAL
LINK
DIGITAL
LINK
out1
out2
(Example 2: In the case of Interface Board for Digital Link 2output)
Note
f
The Control Software for Multi Window Processor shows individual input and output terminals ([Input Fixed Name]/[Output Fixed Name]) by
combining the slot number ([Slot Index]) and input/output terminal number ([Input Index]/[Output Index]).
Example 1: The [Input Fixed Name] of [in1] on the left end of the input board installed in
Slot1
is [Slot1.In1].
Example 2: The [Output Fixed Name] of [out1] on the left end of the output board installed in
Slot15
is [Slot15.Out1].
