Chapter 3
Basic Operations — Preparing the control computer
42 - ENGLISH
Closing the control software
When exiting the control software, you can save current working setting data on the control computer. If saving the data as a new file, you can
load the saved data to use at the next login or in offline mode.
1) Click the [Logout] button on the top right of the control software screen.
f
The
[Logout]
screen will be displayed.
2) Enter a name for the data to be saved.
f
Use single-byte alphabets, numeric digits, and underbars (_) for a name. Up to 19 characters can be entered. Use the alphabets for
the first character.
f
As a name for the setting data to be saved, the serial number of the device is automatically added before the entered string.
3) Click the [OK] button.
f
The current working setting data is saved to log out.
f
Click the [Exit] button to log out without saving the setting data.
f
Click the [Cancel] button to close the
[Logout]
screen and go back to the working screen without saving the setting data.
4) Click the [X] button at the upper right of the login screen.
f
The control software ends.
