manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 95 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 95

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO 

YOUR PREFERENCES

OPERATIONS AND MEASURES 

WHEN AN ALARM GOES OFF

OTHER

RECORD 

MANAGEMENT

SECURITY ALARM SETTING 

AND DISARMING

Press                 . 

However, you cannot switch to the next screen without pressing the alarm stop button.

95

How the screen is displayed when an alarm occurs during another alarm

Switches to the gas leak alarm.

Emergency 
alarm message

Gas leak alarm message

To display a screen with lower priority

If an alarm with higher priority is restored

* If the priority of the later-generated alarm is lower, the alarm display and alarm 

 message remains and the alarm screen is displayed on the sub-screen.

If an alert is generated during another alert, the sub-screen showing the one with higher priority 
appears.
The message for the alarm with higher priority is played. 

Example) If a gas leak alarm (higher priority) occurs during an emergency alarm (low priority)

If an alarm with higher priority is restored, the alarm display 
and message switch to the alarm with lower priority.

7.Windea̲取説（英語）̲1M.indd   95

7.Windea̲取説（英語）̲1M.indd   95

2012/09/06   17:03:48

2012/09/06   17:03:48

Summary of Contents for 1M







































































































































Reviews:

No comments