Panasonic 1M Operation Manuals Download Page 17

Page: 17 / 134

Current status
(Factory setting: Home)

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN AN ALARM GOES OFF

OTHER

RECORD

MANAGEMENT

SECURITY ALARM SETTING

AND DISARMING

Changing Living Mode

■

Setting Details (Factory Setting)

Living Mode

Not Home

( Page 19)

Security

( Page 20)

Ringtone Volume

( Page 20)

Elevator

( Page 20)

High

No Link

Absence

Off

No Link

Sleeping

Off

High

No Link

Home

■

Touch in the Top Menu to display the screen below.

Selecting the current Living Mode (Absence/Sleeping/Home) will set the base unit status
appropriately according to the mode all at once. Change the Living Mode according to the scenes.

Touch the button of a mode
on this screen to change to
the corresponding Living
Mode.

Current Living Mode status
(Factory setting: Home)

Current Living Mode

To change the settings
of each mode, touch
.

●

This operation manual describes functions assuming that this product is used with the factory set

Living

Mode.

*1 Installation settings are required. (Consult with the company that installed the system

or the administrating company.)

*2 Setting with the manager room base unit or the Lobby Phone is required.

(Consult with the company that installed the system or the administrating company.)

Note

●

If the security setting is set to "ON" in all modes, it cannot be disarmed.

●

If the Security settings or Absence Mode settings are changed for the current Living

Mode, the setting for the Living Mode display is cancelled.
To change the Living Mode settings, set the Living Mode again.

Note

Some functions may not be available due to the equipment being used.

7.Windea̲取説（英語）̲1M.indd 17

2012/09/06 17:03:29

Summary of Contents for 1M







































































































































Search results

Summary of Contents for 1M

Reviews:

Panasonic 1M, Operation Manuals, Page: 17 / 134

Search results

Summary of Contents for 1M

Reviews: