Panasonic 1M Operation Manuals Download Page 36

Page: 36 / 134

通話

TALK

After step , the Other Unit screen will
appear. Touch the Annex that you want to
call and go to step .

Talk will automatically end about 1
minute after the start. (Conversation
time can be extended. Page 31)

If you make a mistake in pressing the unit
number, touch and enter it again.

Calling Other Units

Talk

Note

Conversation with the other unit ends.

Press the TALK button

Note

解錠

通話

UNLOCK

復旧/警報音停止

非常

RESET/STOP ALARM

EMERG.

TALK

FIRE CONFIRM

OFF

火災
確認

終了

メニュー

電源

POWER

Calling a Unit in Another Annex

Touch
any one

Touch the keypad

Touch

In an apartment building that does not support the Call Other Unit function (calling another
unit from the unit), you cannot call other units.

Press the TALK button in the
standby status (nothing is
displayed on the screen) and
then touch

Touch the Unit you wish to
call on the keypad, and then
touch

The Number Of The Unit screen will
appear.

Up to 4 digits can be entered as a unit
number.

No images will be displayed. (The screen
turns blue.)

TALK button

7.Windea̲取説（英語）̲1M.indd 36

2012/09/06 17:03:33

Summary of Contents for 1M







































































































































Search results

Summary of Contents for 1M

Reviews:

Panasonic 1M, Operation Manuals, Page: 36 / 134

Search results

Summary of Contents for 1M

Reviews: