manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 82 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 82

解錠

解錠

UNLOCK

復旧/警報音停止

非常

RESET/STOP ALARM

EMERG.

TALK

FIRE CONFIRM

MENU

OFF

火災
確認

終了

メニュー

電源

POWER

OPEN

Not Home

Lock

NOTHOME

Gas GAS

Fire FIRE

警戒

SET

When the Security Alarm Is Activated

82

Use the system after confirming that each device is properly installed.

Note

If a Window Is Opened While the Security Alarm is Active

Security 1 
indication 
flashing in red

Alarm Stop 
button

How to disable the security alarm function

How to stop the alarm message

Note

Note

After about 40 seconds
(also reported to the outside)

P

H

The security alarm 
indicator lamp 
flashing in green

Alarm indicator 
flashes in red

Cordless handset 
of the door phone 
with a camera

If a window is opened while the security alarm is 
active, the magnet switch is turned on and 
security indication is displayed on the base unit.

The Security Indicator 
flashes in green while the 
security alarm is active.

(siren sound) Security alarm 

has activated.

Approximately 40 seconds (factory default 
setting) after the magnet switch is turned on, 
the event is reported to the manager room 
and the handset of the door phone. If it was 
an erroneous report, disarm the security 
alarm within 40 seconds. When the security 
alarm is disarmed, all the indicator lamps and 
display are turned off. For information on how 
to disarm it, refer to pages 102 to 103.

The alarm message stops approximately 80 
seconds after

 the magnet switch is activated, 

indicator lamps on the base unit and the 
handset of the door phone will keep flashing.

Installer 
Setting

It is also possible to disable the 
automatic stop function that is 
activated after 80 seconds.

Consult with the company that installed the 
system or the administrating company.

Press the Alarm Stop button. It is also 
possible to stop the alarm sound from the 
manager room. The alarm sound will be still 
played in the manager room.

Disarm the security alarm. (    Pages 102-103)
The indicators stop flashing.

Installer 
Setting

●

You can choose the security alarm delay time 
and the security preliminary alarm time from 
60, 120, 300 or 0 (immediately) seconds.
The factory default settings of Security 1 
are as follows:

Security alarm delay time: 0 seconds (alarm 
starts immediately)
Security preliminary alarm time: 0 seconds 
(alarm starts immediately)

●

It is also possible to report to the manager room 
and handset of the door phone immediately. 

●

It is also possible not to report to the manager room. 

●

You can also change the screen displayed 
while the security alarm is active.

Consult with the company that installed the 
system or the administrating company.

The Security 1 indication will turn off after 
approximately 3 minutes and the periphery 
of the MENU button will flash in red.

(alarm sound) Security 

alarm has activated.

●

●

●

●

●

●

It is also possible to turn off the Security 1 
indication within 3 minutes. (     Page 75)

●

Up to 4 security circuits can be connected. 
The screen is displayed according to the 
installation setting.

7.Windea̲取説（英語）̲1M.indd   82

7.Windea̲取説（英語）̲1M.indd   82

2012/09/06   17:03:44

2012/09/06   17:03:44

Summary of Contents for 1M







































































































































Reviews:

No comments