manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 88 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 88

解錠

通話

UNLOCK

復旧/警報音停止

非常

RESET/STOP ALARM

EMERG.

TALK

FIRE CONFIRM

MENU

OFF

火災
確認

終了

メニュー

電源

POWER

OPEN

Not Home

Alarm

Lock

NOTHOME

Gas

GAS

SET

When Using Too Much Electricity

88

Note

Note

Alarm Stop button

■

Reduce the electricity usage.

20

Message display 
lights in red

Press the Alarm Stop button.

How to stop the call message

Measures taken when a call is made

The message is displayed for about 
1 minute.

1

2

The message lights in red and the 
power usage indicator flashes

3

Note

●

Nothing is displayed if you are using a distribution board without over 
current alarm device. 

●

Use the system after confirming that each device is properly installed.

The figure shows an example where a 
household distribution panel with an over 
current alarm device (data output)

●

If you are using a distribution panel without 
level meter, the message lights up in red. 

●

For information on screen display and call 
messages, refer to "LCD display and call 
messages". (     Page 89)

The alarm message "(beep sound) 
Too much electricity is being used" 
is output from the speakers of the 
base unit and extension speakers

Note

●

While the power usage is 110% or more, the    
screen display does not turn off. 

●

It is also possible to turn off the screen.  
(     Page 75)

If the electricity usage 
becomes 100% or below (or 
90% or below), the call 
message automatically stops

The message stop once but it will be repeated 
until the electricity usage becomes 100% or less 
(or 90% or less).

Installer 
Setting

To change the contracted demand, it 
is necessary to change the 
distribution panel setting. 

Consult with the administrating 
company.

The electricity 
usage indicator 
flashes.

W

H

Pr
(It

"Be-Be-Beep", 

Too much electricity 

is being used.

7.Windea̲取説（英語）̲1M.indd   88

7.Windea̲取説（英語）̲1M.indd   88

2012/09/06   17:03:46

2012/09/06   17:03:46

Summary of Contents for 1M







































































































































Reviews:

No comments