manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 9 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 9

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO 

YOUR PREFERENCES

OPERATIONS AND MEASURES 

WHEN AN ALARM GOES OFF

OTHER

RECORD 

MANAGEMENT

SECURITY ALARM SETTING 

AND DISARMING

Cautions

9

Setting Date and Time

Care

Precautions in use

Do not use benzene etc. because it is inflammable.

●

Do not pour water!

It may cause failure.

It may cause failure.

Images and sound 
may be disrupted.

It may cause failure.

Note

Time Display of the Base Unit

Note

 

●

Date and time are set on the Lobby Phone or the base unit in the Manager Room.  
(Individual settings of date and time on the base unit are not available.) 
Date and time may be deleted in a power outage. Date and time must be set again on the Lobby 
Phone and base unit in the Manager Room.

●

The time display on the liquid crystal screen of the base unit does not appear when shipped.When 
connected to the control device, the base unit starts time calibration to display time initially. (The 
time set on the Lobby Phone or the base unit in the Manager Room will be displayed.) Since the 
time is regularly calibrated likewise, time may not be displayed properly when the control device is 
disconnected or in a power outage.

●

When not connected with the control device, the base unit cannot display time.

● 

Once the base unit is connected to the control device, the activated time display 
cannot be cancelled.

For regular cleaning...

Wipe with a soft cloth.

When visibly dirty...

Wipe with a soft cloth soaked in diluted neutral detergent 
and tightly squeezed. Do not use spray type detergent.

●

Heaters and other high 
temperature objects 
should be kept away!

●

A rice cooker or other 
steaming object 
should not be placed 
under the base unit!

●

A TV set or radio 
should be kept at least 
2m from the base unit!

Neutral dete

rgent

7.Windea̲取説（英語）̲1M.indd   9

7.Windea̲取説（英語）̲1M.indd   9

2012/09/06   17:03:28

2012/09/06   17:03:28

Summary of Contents for 1M







































































































































Reviews:

No comments