manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 64 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 64

Press        (OFF Button) to go to the standby state 
(state in which nothing is displayed on the screen).

On the Return Home Notification 
Setting Screen, touch         for the 
setting you wish to set

For details on each setting, please see below.

Touch                on the Setting Screen

The Return Home Notification Setting Screen is 
displayed. 
For how to start the settings, please see page 50.

Note

Select one of "On/Off" and 
touch 

Note

64

Setup screen

Touch

Return Home Notification Setting

2

Touch

2

3

Unlock With ID Authentication Key Screen

ID Authentication Key Off

Touch 
any one

1

Touch 
any one

1

Return Home Notification Setting Screen

Finish settings

4

OFF

終了

終了

In apartment buildings in which the ID Checker has not been set up, "ID Authentication Key Off" 
will not be displayed.
If you do not know which system is installed, please contact store responsible for installation or 
the service and maintenance company.

In apartment buildings in which the ID Checker has not been set up, "Return Home Notification Setting" will 
not be displayed.
If you do not know which system is installed, please contact store responsible for installation or the service 
and maintenance company.

On

Security is turned off when the 
Main Entrance is unlocked.

Security is not turned off when the 
Main Entrance is unlocked.

Off

factory
default
setting

7.Windea̲取説（英語）̲1M.indd   64

7.Windea̲取説（英語）̲1M.indd   64

2012/09/06   17:03:40

2012/09/06   17:03:40

Summary of Contents for 1M







































































































































Reviews:

No comments