Panasonic 1M Operation Manuals Download Page 15

Page: 15 / 134

解錠

通話

UNLOCK

TALK

FIRE CONFIRM

OFF

火災
確認

終了

メニュー

電源

POWER

Unlock

Talk

UNLOCK

TALK

OFF

Power

POWER

Unlock

Talk

UNLOCK

TALK

OFF

Power

POWER

Notch

microSD memory card

microSD
memory card

●

Open it by hooking a finger

into the hole

Groove

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN AN ALARM GOES OFF

OTHER

RECORD

MANAGEMENT

SECURITY ALARM SETTING

AND DISARMING

red

Inserting and Ejecting a microSD Memory Card

Using a Handset (Receiver) Sold Separately

Using an Extension Speaker

Note

Remove the setting cover

Ejecting the microSD

The call sound sounds, and the monitor screen shows images.

Pick up the receiver and talk on the receiver.

When finished talking, put the receiver back.

*The screen turns blue when the caller device does not have a camera.

[Calling with the Handset (Receiver)]

[In the case of the luminous extension speaker, the flashlamp will light together with the call sound.]

A handset (receiver) sold separately can be installed.

The warning sound or call sound sounds at the same time as the base unit.

Handset (Receiver)

Note

解錠

通話

UNLOCK

TALK

FIRE CONFIRM

OFF

火災
確認

終了

メニュー

電源

POWER

Press with
fingers

Hooks

Grooves

Install the setting cover

Press with fingers

Setting cover
insertion hole

Setting
cover

●

Insert a microSD memory card during standby status (when nothing is displayed on the screen).

●

Follow the eject operation described on page 69 when ejecting the microSD memory card.

Confirm the orientation of
the microSD memory
card, and insert it straight
in until you hear a click

Insert the setting
cover in the setting
cover insertion hole

Lightly set the hooks
into the grooves

Lightly set the
hooks into the
grooves

memory card

Push the microSD memory card until
you hear a click, then pull the popped
out card straight out.

You can talk on the receiver if you pick up the receiver while talking on
the base unit. When finished talking, put the receiver back.

You cannot switch to the base unit (hands free) while talking on the
handset (receiver).

Consult with the company that installed the system or the
administrating company.

te.

Recess Model:

SHV8110K

op.

7.Windea̲取説（英語）̲1M.indd 15

2012/09/06 17:03:29

Summary of Contents for 1M







































































































































Search results

Summary of Contents for 1M

Reviews:

Panasonic 1M, Operation Manuals, Page: 15 / 134

Search results

Summary of Contents for 1M

Reviews: