manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 73 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 73

Press         (OFF Button) to go to the 
standby state (state in which nothing is 
displayed on the screen).

Delete Recorded Data will start. 
When Delete Recorded Data has 
finished, touch               to return to 
the Initialize screen.

Visitor records that have been protected 
will not be deleted. To delete these, 
please cancel the protection and use 
Delete Recorded Data again. 

For how to cancel the protection, 
    see page 111

Setting according to your preferences

73

Finish settings

4

OFF

終了

終了

Touch either "Yes/No"

When "Yes" is selected

When "No" is selected

The display returns to the Initialize 
Screen.

3

Touch 
any one

When "Yes" is selected

Delete Recorded Data Finished Screen

Note

Delete Recorded Data

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO 

YOUR PREFERENCES

OPERATIONS AND MEASURES 

WHEN AN ALARM GOES OFF

OTHER

RECORD 

MANAGEMENT

SECURITY ALARM SETTING 

AND DISARMING

7.Windea̲取説（英語）̲1M.indd   73

7.Windea̲取説（英語）̲1M.indd   73

2012/09/06   17:03:41

2012/09/06   17:03:41

Summary of Contents for 1M







































































































































Reviews:

No comments