Panasonic 1M Operation Manuals Download Page 129

Page: 129 / 134

129

m."

(

△

: earthquake value,

□

: in increments of 10 seconds)

Security preliminary alarm

Security lock-up

Simplified earthquake intensity display

Emergency intensity alert

(erroneous report)

Elevator Stopped

Elevator Restored

Delivery notification

Return home notification

"(beep) Warning! A strong earthquake is about to come."

After a "beep", The elevator is working again." x 2 times

After a "beep", "The elevator has stopped because of an earthquake." x 2 times

"(beep sound) We have an earthquake. Please be warned."

"(beep sound) Warning! An earthquake is about to come."

"beep"

"(beep) Check that all windows and doors are locked."

"(beep) Security is operating."

Detailed earthquake intensity display

Emergency earthquake alert

(Intensity 5-lower or above)

Emergency earthquake alert

(by the S-wave sensor)

Emergency earthquake alert

(test)

Simplified earthquake intensity display

Emergency earthquake alert

(test alert)

Detailed earthquake intensity display

Emergency earthquake alert

(Intensity 3 – Intensity 5-lower)

Emergency earthquake alert

(Intensity 3 – Intensity 5-lower)

Emergency earthquake alert

(Intensity 5-lower or above)

"(beep) The earthquake alarm from a moment ago was an error. Please be at

ease."

"(beep) We are now beginning an earthquake alarm test. (beep) Warning! A

strong earthquake is about to come. (beep) The earthquake alarm test is now

over."

"(beep) We are now beginning an earthquake alarm test.

(siren) Earthquake coming in 30 seconds. Intensity 6(six)-lower (siren)

(siren) Earthquake coming in 20 seconds. Intensity 6(six)-lower (siren)

(siren) Earthquake coming in 10 seconds. Intensity 6(six)-lower.

(beep sound) Earthquake very soon. Intensity 6(six)-lower." after this,

"We have an earthquake. Please be warned." after repeating this 2 times,

"(beep) The earthquake alarm test is now over."

The above test message is for the case where the test was started 30 seconds before.

The test pattern differs depending on the settings of the emergency earthquake alert interface board.

"(beep sound) Warning! An earthquake is about to come. Intensity

△

"(beep sound) Warning! An earthquake is about to come in

□

seconds.

Intensity

△

(beep sound)"

"(beep sound) Earthquake very soon. Intensity

△

(beep sound)"

"We have an earthquake. Please be warned." x 2 times

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN AN ALARM GOES OFF

OTHER

RECORD

MANAGEMENT

SECURITY ALARM SETTING

AND DISARMING

7.Windea̲取説（英語）̲1M.indd 129

2012/09/06 17:03:58

Summary of Contents for 1M







































































































































Search results

Summary of Contents for 1M

Reviews:

Panasonic 1M, Operation Manuals, Page: 129 / 134

Search results

Summary of Contents for 1M

Reviews: