manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 22 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 22

Touch         . 
The sub-screen will be closed and only the 
main screen will be displayed. 
Touch          in the full-screen display to show 
the main screen and the sub-screen again.

Images of the Lobby Phone

22

Touch

Touch

Receiving a Call

Closing the sub-screen

Talking

Installer 

Setting

The sub-screen position can be changed with the setting of the Lobby Phone. 
(Consult with the company that installed the system or the administrating company.) 

●

Main screen: 

Displays the current image. 

●

Sub-screen: 

Repeatedly displays about a 

 

two-second image of the caller 

 

operating the Lobby Phone to call.

●

Main screen: 

Displays the current image. 

●

Sub-screen: 

If the Lobby Phone is equipped with a 

 

separately installed camera, images 

 

from the separately installed camera 

 will 

be 

displayed. 

 

The sub-screen is not displayed when 

 

there is no separately installed camera.

Main screen

Sub-screen

Main screen

Sub-screen

7.Windea̲取説（英語）̲1M.indd   22

7.Windea̲取説（英語）̲1M.indd   22

2012/09/06   17:03:30

2012/09/06   17:03:30

Summary of Contents for 1M







































































































































Reviews:

No comments