Panasonic 1M Operation Manuals Download Page 11 | Manualshive

Page: 11 / 134

Panasonic 1M Operation Manuals Download Page 11

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN AN ALARM GOES OFF

OTHER

RECORD

MANAGEMENT

SECURITY ALARM SETTING

AND DISARMING

Cautions

11

●

Follow the steps on page 69 to 70 to initialize a microSD memory card. Initializing on other devices
such as a PC, may reduce the space for video or sound recordings, or may hamper proper
operation.

●

Initialization of a microSD memory card will delete all the data it has recorded. Save the data you
need in your PC or another device.

●

Image data or a folder contained in a microSD memory card is edited or renamed on a PC etc., the
data will not be played back normally with the base unit.

●

Operation speed may decrease when using microSD memory cards if they are near full capacity.
Review the content of the memory card regularly and avoid storing unnecessary data on the
microSD memory card.

●

Note that when using microSD memory cards, moving any saved data from card to the PC will
change all "Unread" items to "Read".

Note

It cannot be played with such a device as a PC.
Use the base unit to play it back.

7.Windea̲取説（英語）̲1M.indd 11

7.Windea̲取説（英語）̲1M.indd 11

2012/09/06 17:03:28

2012/09/06 17:03:28

«
...
9
10
11
12
13
...
»

Summary of Contents for 1M







































































































































Reviews:

No comments