manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 59 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 59

Continued on next page

After touching                       , you 
can record the message. For how to 
record, please see pages 58 to 59.

●

The "Recorded Message" is activated by a 

call from the Lobby Phone or the Door 
Phone. 

●

Only 1 message can be recorded. To 

record a new message, the old message 
should be deleted. 

●

The same recorded message is used for the 

"Away-from-home Message" (      page 58).

●

Only 1 message can be recorded. To record a 
new message, the old message should be 
deleted. 

●

The same recorded message is used for the 
"Pretend To Be Out Message" (    page 59). 

Touch

Start recording. The recording time is about 15 
seconds. If you finish the recording within this 
time, please press           .

Touch         to confirm that the message 
has been recorded

Setting according to your preferences

59

Note

Touch

Touch

2

3

2

3

Touch 
any one

1

Touch

2

Fixed message 1

Recorded 
Message

Please record a message. The recording time is about 15 seconds.

Pretend To Be Out Message

Pretend To Be Out Message Type Screen

3

The Fixed Message cannot be changed.

Note

The Fixed Message cannot be changed.

Note

Note

Select any of "Fixed Message 
1/Fixed Message 2/Recorded 
Message", and touch 

"No one can answer at the moment."

"May I have your name please?"

●

For your own security, we would strongly advise you not to record 

a message which clearly indicates that you are out. 

●

Please record in a quiet environment.

●

The volume of the answer message from the main entrance and 

unit entrance will vary depending on the distance between the 
person and the base unit. If the person's voice is too low, the 
message will be difficult to hear. If too loud, a crackling may occur.

Note

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO 

YOUR PREFERENCES

OPERATIONS AND MEASURES 

WHEN AN ALARM GOES OFF

OTHER

RECORD 

MANAGEMENT

SECURITY ALARM SETTING 

AND DISARMING

Fixed message 2

factory default 
setting

7.Windea̲取説（英語）̲1M.indd   59

7.Windea̲取説（英語）̲1M.indd   59

2012/09/06   17:03:39

2012/09/06   17:03:39

Summary of Contents for 1M







































































































































Reviews:

No comments