Panasonic 1M Operation Manuals Download Page 50

Page: 50 / 134

Press (MENU Button)

解錠

Talk

UNLOCK

復旧/警報音停止

Emergency

RESET/STOP ALARM

EMERG.

TALK

FIRE CONFIRM

OFF

火災
確認

終了

メニュー

電源

POWER

Starting User Setting

The Setting Screen is displayed.

Note

Press

standby state

Touch

User Setting Screen

Touch the item you wish to set

Touch in the Top Menu

メニュー

With nothing displayed on the screen
(standby state)

Top Menu

( pages 52 to 73)

Touch any one

The User Setting Screen is displayed.
Touch to go back to the previous
screen.

If the item you wish to set is not
displayed, touch or to change
the displayed content.

If no operation is performed for 30 seconds,
the system returns to the standby state.

P
st
th

●

If no operation is performed for 30 seconds,
the system returns to the standby state.

●

When Setting is not displayed, please touch

or to display the setting button, and

then touch.

MENU Button

Touch to
change
screens

Touch
to go to
2/2

Touch
to go to
1/2

7.Windea̲取説（英語）̲1M.indd 50

2012/09/06 17:03:37

Summary of Contents for 1M







































































































































Search results

Summary of Contents for 1M

Reviews:

Panasonic 1M, Operation Manuals, Page: 50 / 134

Search results

Summary of Contents for 1M

Reviews: