manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 27 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 27

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO 

YOUR PREFERENCES

OPERATIONS AND MEASURES 

WHEN AN ALARM GOES OFF

OTHER

RECORD 

MANAGEMENT

SECURITY ALARM SETTING 

AND DISARMING

               is not displayed if the settings for for 
the Door Phone Light have not been made.

Installer 

Setting

● 

             is not displayed in images from the Lobby 

  Phone with camera or the separately installed camera.

● 

Irradiation distance of the built-in light is about 50 cm.

  Background further than that is not shown.

Set "Extension Light Setting" (    Page 71) to 
"Auto" to perform this function automatically.

When the screen becomes dark because the 
background is dark, the built-in light of the 
cordless handset of the door phone with 
camera lights to make the image easy to see.
            changes to            .
Touch             to turn off the light.
            changes to            .

You cannot adjust images from the separately 
installed camera. (    Page 32)

When the background is too bright and the face is dark, 
or the face is too bright, you can adjust the image.
            changes to            .
Touch             to end image adjustment. 
            changes to            .

Touch          during the conversation until 
            /            /            appears on the screen

Receiving a Call

27

Adjusting images

Touch

Adjusting the Screen Brightness

Touch

Images are difficult to see

Note

Note

Note

Note

Touch

Touch

Touch

Touch

he 

Brightness of the monitor screen changes 
each time you press the button. 
You can adjust the brightness in 5 stages. 
Look at the brightness level indicator
while adjusting the screen brightness.

Once adjusted, the brightness setting is 
recorded until next adjustment.

Images are too dark to see 
(only for the Unit Entrance)

Touch

● 

When called from the Door Phone, the Manager Room, or another unit, no image will appear. 

  (The screen turns blue.)

●

The image cannot be adjusted.

Switch

Bright

Adjust

Light

7.Windea̲取説（英語）̲1M.indd   27

7.Windea̲取説（英語）̲1M.indd   27

2012/09/06   17:03:32

2012/09/06   17:03:32

Summary of Contents for 1M







































































































































Reviews:

No comments