manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 54 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 54

54

2

Earthquake Setting Screen

Finish settings

4

OFF

終了

Setup screen

Touch

1

Earthquake Setting

Touch

2

Off

No call Earthquake Alarm will be emitted.

Note

3

Touch                on the Setup Screen

Select one of "Off/Low/Medium/High" 
and touch 

●

In apartment buildings installed with systems that do not support the Earthquake Alarm

（

Warning), 

"Earthquake Setting" is not displayed on the setting screen. If you do not know which system is installed, 
please contact store responsible for installation or the service and maintenance company. 

●

In the case of the Full Intensity Display, Intensity 3 and Intensity 4 can be set as separate settings once 
the system has started receiving earthquake information. 

●

The volume increases to "High" at earthquake intensities of 5 or higher.

The Earthquake Setting Screen is displayed. 
For how to start the settings, please see 
page 50.

On the Earthquake Setting 
Screen, touch         
for the content 
you wish to set

*The screen below is for selecting Controller settings. 

(Consult with the company that installed the system or the administrating company.)

■

When the system is set to 
Full Intensity Display

■

When the system is set to 
Simplified Intensity Display

Touch 
any one

●

The figure shows the case of the Full 
Intensity Display.

1

Touch 
any one

終了

Press        (OFF Button) to go to the standby 
state (state in which nothing is displayed on 
the screen).

Touch 
any one

Volume

The set volume will be emitted.

High, Medium, Low

Factory default

setting: medium

7.Windea̲取説（英語）̲1M.indd   54

7.Windea̲取説（英語）̲1M.indd   54

2012/09/06   17:03:38

2012/09/06   17:03:38

Summary of Contents for 1M







































































































































Reviews:

No comments