When the Security Alarm Is Activated
84
Use the system after confirming that each device is properly installed.
Note
A
Disarming the security alarm (when the security alarm/security preliminary alarm is active: disarm the alarm)
The security number input screen appears.
Message details: "Security has been turned off."
Note
Note
Security number input screen
Confirmation screen
FIRE CONFIRM
MENU
OFF
火災
確認
終了
メニュー
電源
POWER
警戒
SET
1
2
3
Enter the security number
Touch the
keypad
The security alarm
indicator
lamp flashing in
green
Touch on the base unit
while the security preliminary
alarm or security alarm is active
If no operation is performed for 10 seconds, the
system goes back to the security alarm status In
that case, repeat the procedure from Step .
1
If no security number is set, the security alarm
status is disarmed.
It is not necessary to perform Step and the
subsequent steps.
2
The entered security number is displayed
on the screen.
Please enter the set security number.
Touch .
If you make a mistake when entering the number,
touch . This clears all numbers.
If the Security Number is correct, the
Security light turns off and the alarm is
disarmed. The message "Security has been
turned off." appears on the screen. After 3
seconds have elapsed, the screen changes
to Standby status and then to the Mode
Selection Screen. Please select Living Mode.
If the wrong security number is entered, the
screen returns to the Security Number Input
Screen. If this happens, repeat the
procedure from Step .
2
Installer
Setting
It is possible to sound the alarm notification
message when disarming the alarm.
Consult with the company that installed the system
or the administrating company.
W
T
a
t
t
t
Touch
Touch
7.Windea̲取説（英語）̲1M.indd 84
7.Windea̲取説（英語）̲1M.indd 84
2012/09/06 17:03:45
2012/09/06 17:03:45