manualshive.com logo in svg

Panasonic 1M, Operation Manuals, Page: 1 / 134

Share
Download
Panasonic 1M Operation Manuals Download Page 1

512AB

For Apartment Building HA D Series

Operation Manual

The images are for products with 
VGDT serial numbers.

Warranty

Enclosed Separately

Installation Manual

Enclosed Separately

Type

Product Number

Thank you very much for your purchase of a Panasonic 
product.

●

Read the operation manual carefully for correct and 
safe use.

Be sure to read "Safety Precautions" (page 6) 
before use.

●

Check "Date of Purchase and Store Name" written in 
the warranty, and store in a safe place together with 
the operation manual.

復旧/警報音停止

非常

RESET/STOP ALARM

EMERG.

FIRE CONFIRM

MENU

OFF

火災
確認

終了

メニュー

電源

POWER

解錠

通話

UNLOCK

TALK

Security Intercom Model 1M

For Apartment Buildings - 
 

Base Unit (In-wall type)

VGDT18112W

VGDT18512W

For Unit - 

 

Base Unit (In-wall type)

VGDB18112W

VGDB18512W

7.Windea̲取説（英語）̲1M.indd   表1

7.Windea̲取説（英語）̲1M.indd   表1

2012/09/06   17:03:26

2012/09/06   17:03:26

Summary of Contents for 1M







































































































































Reviews:

No comments